MC-F26 3MP TF Card Dual-Light IPC Module – SSC335 + SC3336 Local Storage
| MC-F26 3MP TF Card Dual-Light IPC Module – SC3336 Local StorageSolution: SSC335 + SC3336 3MP 1/2.8″ CMOS Encoding: H.265+ / H.265 / H.264 Main Stream: 25fps @ 2304×1296 / 1920×1080 Dual Light: Full-color (warm light) + IR switchable Storage: TF card up to 512 GB local storage Smart: Human detection / Custom area Network: RJ45 10/100M, ONVIF/RTSP/DHCP/P2P Size: 38 mm × 38 mm | Power: DC12V / 120mA |
Features
*1/2.8″ SC3336 3MP CMOS sensor for compact dual-light surveillance
*H.265+/H.265/H.264 adaptive encoding; bitrate 0.1–6 Mbps; frame rate 1–25 fps
*Dual light mode: full-color (warm light) + infrared; key-press light mode switching
*Soft photosensitivity control: Dual-light / Full-color / Infrared mode
*TF card local storage – supports up to 512 GB (standalone NVR-free operation)
*Intelligent analysis: human detection, custom area intrusion detection
*Adaptive IP assignment: default DHCP, ONVIF adaptive IP
*Voice intercom, voice broadcast, custom voice support
*Integrated IRCUT circuit – auto/manual/timer day-night control
*G.711 audio codec; two-way voice intercom; audio-video synchronization
*APP remote monitoring: VideoLink (iOS & Android)
*ONVIF; RTSP/DHCP/NTP/P2P protocol support
*SDK: Windows, Android, Linux
*Lightning protection: GB/T17626.5 & IEC61000-4-5
*Compact 38×38mm form factor; OEM/ODM customization supported
Specifications
| General | Description |
| Model | MC-F26 |
| Main Control Chip | SSC335 |
| Image Sensor | SC3336, 3MP, 1/2.8″ CMOS |
| Video | Description |
| Video Encoding | H.265+ / H.265 / H.264 (adaptive) |
| Bitrate | 0.1 – 6 Mbps (adjustable) |
| Frame Rate | 1 – 25 fps (adjustable) |
| Main Stream | 25FPS @ 2304×1296, 1920×1080, 1280×720 |
| Sub Stream | 720×480, D1, VGA, 640×360 |
| Storage | Description |
| Local Storage | TF card slot, supports up to 512 GB |
| Lighting | Description |
| Light Mode | Dual-light: Full-color (warm) + Infrared; Full-color only; Infrared only |
| IRCUT | Integrated circuit; auto / manual / timer control |
| Light Interface | PWM infrared + PWM warm light |
| Audio | Description |
| Audio Codec | G.711 |
| Audio Interface | 1-ch linear input + 1-ch linear output |
| Two-way Audio | Supported |
| Smart Features | Description |
| Intelligent Analysis | Human detection, custom area detection |
| Alarm | Dual light source alarm, sound alarm |
| Network | Description |
| Network Interface | 1 × RJ45, 10/100M self-adaptive Ethernet |
| Protocols | RTSP, DHCP, NTP, ONVIF, P2P |
| Mobile APP | VideoLink (iOS & Android) |
| SDK | Windows, Android, Linux |
| Power & Environment | Description |
| Power Supply | DC 12V |
| Power Consumption | 120 mA |
| Working Temperature | -40°C to +85°C |
| Lightning Protection | GB/T17626.5, IEC61000-4-5 |
| Dimensions | 38 mm × 38 mm |
SSC335 OpenIPC Compatibility
MC-F26 is a Videolink / MC IPC camera module based on SigmaStar SSC335 with SC3336.
Can MC-F26 run OpenIPC?
OpenIPC has an upstream SSC335 firmware build. The inspected infinity6b0 loader contains an SC3336 sensor entry. This is a useful software starting point for MC-F26, but it does not verify the fitted PCB, flash layout or image-tuning profile.
OpenIPC is also searched as “Open IPC”. Compatibility refers to alternative firmware; it does not mean that the factory app, AI detection or original video modes will carry over. Confirm the full SoC and sensor IDs, flash type, PCB revision and intended firmware before conversion.
Evidence reviewed: 16 September 2026. OpenIPC technical reference.